Omega FPU2000, FPUVS2000, FPUDV2000

Variable Speed and Fixed Timer Peristaltic Pumps FPU2000 Series

More details

The FPU2000 Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000 Series have fixed speed outputs and can be adjusted by selecting the pumphead tube size and choosing the desired RPM (revolutions per minute).

The FPUVS2000 and FPUDVS2000 Series variable speed pumps are for continuous pumping relatively pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.

The FPUDVS2000 Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA and 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) and digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000 Series.

A liquid tight connector is supplied and should be used for the external signal cable. The signal input wires are color coded to the type of signal being used.


FEATURES

 • Peristaltic Pump Tube Does Not Require Valves

• Self Priming

• High Outlet Pressure Capability of 100 psig on Most Models

• Acceptable for Indoor Use

• Corrosion Proof Valox Housing

• Tamper Resistant Electronic Control Panel Cover

• Tube Failure Detection


SPECIFICATIONS

Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30') water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (618 x 1018 x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6¼ x 10 x 9¼")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (38" ID x ¼" OD)

Peristaltic Pumps
Model No. Variable Speed   Max Feed Rate Max Strokes/Minute

Fixed-Timer

Control

Standard

Percentage

Digital Percentage

Controllers

Pump Tube

OD (inch)

 

mL/min

 

GPD

 

PSI

 

RPM

FPU2001 FPUVS2001 FPUDVS2001 ¹⁄₄ 6 2.3 100 14
FPU2002 FPUVS2002 FPUDVS2002 ¹⁄₄ 13 4.9 100 30
FPU2003 FPUVS2003 FPUDVS2003 ¹⁄₄ 21 8 100 45
FPU2004 FPUVS2004 FPUDVS2004 ¹⁄₄ 25 9.5 75 60
FPU2005 FPUVS2005 FPUDVS2005 ³⁄₈ 18 6.8 100 14
FPU2006 FPUVS2006 FPUDVS2006 ³⁄₈ 42 16 100 30
FPU2007 FPUVS2007 FPUDVS2007 ³⁄₈ 63 24 100 45
FPU2008 FPUVS2008 FPUDVS2008 ³⁄₈ 79 30.1 75 60
FPU2009 FPUVS2009 FPUDVS2009 ⁷⁄₁₆ 57 21.7 50 14
FPU2010 FPUVS2010 FPUDVS2010 ⁷⁄₁₆ 138 52.5 50 30
FPU2011 FPUVS2011 FPUDVS2011 ⁷⁄₁₆ 200 76.1 50 45
FPU2012 FPUVS2012 FPUDVS2012 ⁷⁄₁₆ 250 95.1 50 60


Accessories

Model No. Description
TYSP5F-3814-50 15 m (50') spool of ³⁄₈ x ¹⁄₄" santoprene tubing
FPU2000-14PTA ¹⁄₄" OD pump tube assembly
FPU2000-38PTA ³⁄₈" OD pump tube assembly
FPU2000-716PTA ⁷⁄₁₆" OD pump tube assembly
FPU2000-RA Roller assemblies for ¹⁄₄ and ³⁄₈" tube models
FPU2000-716RA Roller assemblies for ⁷⁄₁₆" tube model
FPU2000-PHB Pump head cover with bearing
FPU2000-PH Pump head
FPU1000-AB Quantity 2, armature bearings
FPU1000-IF Quantity 2, armature bearings
FPU2000-TN Tube nut (³⁄₈")
FPU2000-CW Ceramic weight
FPU2000-SP Strainer plug



No customer comments for the moment.

Only registered users can post a new comment.

27 other products in the same category:

Categories

Suppliers

    Copyright 2018 Semeru Teknik. All Rights Reserved