Omega FPU400 Series

Omegaflex ® OEM Style Peristaltic Pump Kits

More details

FPU400 Series peristaltic pumps offer simplicity at a reduced cost. The motor turns the rollers, which squeeze fluid through the precision-bore high-tolerance tubing in a wavelike motion, acting like a positive displacement pump. The fluid doesn’t touch the pump; it only comes into contact with the tubing. This makes the pump suitable for fluids carrying small particles. FPU400 pumps continuously overocclude the tubing, which makes the pump self-priming and non-siphoning. They are easy to maintain, with few moving parts and no seals or valves to clog, clean, or replace. As one section of tube fatigues, just move the tubing to a section that hasn’t been under the rollers and continue pumping. Or simply replace the supplied tubing. The replacement 230 mm (9") lengths of precision-bore tubing ensure repeatable pumping rates time after time. The pumps are supplied with tubing that has polyethylene union connectors for hooking up system tubing. The replacement 230 mm (9") lengths of tubing come without connectors. The pumps are supplied standard with a mounting panel. The AC-powered pumps are also available in a rugged polycarbonate enclosure for bench mounting. Maximum backpressure is 15 psi without derating (up to 25 psi @ 75% of maximum flow). Maximum suction head is 8.5 m (28'). Flow rate repeatability from one pump to the next or when replacing tubing is within 8% of maximum flow rate listed. Shipping weight is 1.6 kg (3.5 lb) for all sizes. These pumps are ideal for metering/dosing, repetitive dispensing, and general liquid/gas transfer, and they have a 100% duty cycle for continuous operation.


FEATURES

• Suitable for Fluids Carrying Small Particles

Easy to Maintain

Mounting Panel Standard

Benchtop Case Optional

High-Flow FPU4500 Series has 2000 mL/Min Capacity


SPECIFICATIONS (FPU400)
Mounting Plate: 94 L x 130 W x 109 mm D (3.74 x 5.12 x 4.28"); 5.6 mm (0.22") diameter holes are centered 76 x 110 mm (3.0 x 4.34") on the plate
For units with rear fan: 130 L x 130 W x 135 mm D (5.11 x 5.12 x 5.28") overall
Case: 152 H x 152 W x 102 mm D (6 x 6 x 4")
Shipping Weight: 1.6 kg (3.5 lb)
Ambient Temp Range: 20 to 30°C (68 to 86°F)
Max Liquid Viscosity: 8500 cp

SPECIFICATIONS (FPU4500)
Electrical: 115 Vac/60 Hz
Flow Rate: 2000 mL/min (78.6 oz)
Mounting: 12-gage zinc-plated steel mounting plate (included)
Dimensions: 140 H x 116 W x 191 mm D (5.5 x 4.6 x 7.5")
Shipping Weight: 2.4 kg (5.3 lb)

Many options available. Use the custom part number below to add options to your FPU400 series pump. (Note, not all options are mutually-compatible).


Replacement 230 mm (9") Tubing Lengths

Model No. Description (ID x OD)
FPU116-S ¹⁄₁₆ x ¹⁄₈" silicone tubing*
FPU18-N ¹⁄₈ x ³⁄₈" Norprene tubing
FPU18-S ¹⁄₈ x ³⁄₈" silicone tubing
FPU316-N ³⁄₁₆ x ³⁄₈" Norprene tubing
FPU316-S ³⁄₁₆ x ³⁄₈" silicone tubing
FPU14-N ¹⁄₄ x ⁷⁄₁₆" Norprene tubing
FPU14-S ¹⁄₄ x ⁷⁄₁₆" silicone tubing

* Tubes are supplied inserted into 3⁄16 x 3⁄8" tubes. Connection is made to the 1⁄16 x 1⁄8" internal tubing. Brushless 115 Vac, 60 Hz induction motors; flow rates based on pumping water.


 

Model No.

 

RPM

Amperage

(115 Vac)

¹⁄₁₆" ID Tube ¹⁄₈" ID Tube ³⁄₁₆" ID Tube ¹⁄₄" ID Tube
ml/min GPM ml/min GPM ml/min GPM ml/min GPM
FPU401 14 0.37 3 0.0008 12 0.0032 28 0.007 48 0.013
FPU402 23 0.42 5 0.0013 19 0.0050 46 0.012 81 0.021
FPU403 28 0.75 6 0.0016 24 0.0063 56 0.015 98 0.026
FPU404 36 0.90 8 0.0021 30 0.0079 72 0.019 126 0.033
FPU405 49 1.00 10 0.0026 41 0.011 98 0.026 172 0.045
FPU406 58 1.20 12 0.0032 49 0.013 116 0.031 208 0.055
FPU407 75 1.50 16 0.0042 63 0.017 150 0.040 263 0.069
FPU408 108 1.90 23 0.0061 91 0.024 216 0.057 378 0.100
FPU409 129 2.20 27 0.0071 108 0.029 258 0.068 452 0.119
FPU410 172 2.20 36 0.0095 144 0.038 344 0.091 602 0.159
FPU411 203 2.20 43 0.0114 170 0.045 406 0.107 711 0.188
FPU412 282 2.20 60 0.159 237 0.063 564 0.149 987 0.261
FPU4500* ³⁄₈" ID tube, 2000 ml/min (0.528 GPM) @ 60 Hz

FPU400 Series comes complete with four 230 mm (9") lengths of Norprene tubing (1⁄16, 1⁄8, 3⁄16, and 1⁄4"), 2 rollers, mounting plate, tubing unions,
1.8 m (6') 115 Vac power cord, and operator’s manual.
* The FPU4500 comes complete with Norprene tubing (not available as a case unit with timer), and operator’s manual.
To replace standard Norprene tubing with silicone, add suffix “-SL” to model number, no additional cost.
For models with dual head option, add suffix “-DUAL” to model number, for additional cost.
For models with 240 Vac power, add suffix “-240VAC” to model number, for additional cost.
For models with optional case, add suffix “-CASE” to model number, for additional cost.
For models with optional settable timer and case, add suffix “-CT” to model number, for additional cost.
Ordering Examples: FPU401, 23 rpm pump kit.
FPU4500, peristaltic pump 2000 ml/min (0.528 GPM).
FPU401-DUAL-CT, 23 rpm pump kit, with dual heads, optional timer and case.


No customer comments for the moment.

Only registered users can post a new comment.

27 other products in the same category:

Categories

Suppliers

    Copyright 2018 Semeru Teknik. All Rights Reserved