Omega FPUDX1700 Series

Dual-Head Injector Metering Pumps

More details


FPUDX1700 Series duplex head injector pumps feature dual, side-mounted heavy-duty cartridge valve heads. This durable liquid end is injection molded of polypropylene and includes: Double-sealed PVDF cartridge valve fittings, FKM O-ring seals, ceramic ball checks, Hastelloy valve springs, and a PTFE /EPDM diaphragm. Each head is independently controlled by an easy-to-adjust, top-mounted feed adjustment. These pumps are suitable for a variety of applications, including: to inject different amounts of simular chemicals into separate systems; feed two different chemicals into the same system or feed different chemicals into separate systems; or when a single-head pump does not provide sufficient output.


FEATURES

• Simple Intake and Discharge Check Valve Design

Quick Adjusting Feed Mechanisms

Dual Side-Mounted Cartridge Valve Heads

Each Head Independently Controlled

Top-Mounted Feed Adjustment

100% Duty Cycle


SPECIFICATIONS
Output Accuracy: ±10% of maximum [water @ 21°C (70°F) and 1.5 m (5') suction lift]
O-Ring: FKM standard; ethylene propylene, silicone optional
Turndown Ratio: 10:1
Power: 115/60 Hz, optional 230V/60 Hz, 220V/50 Hz, 24 V/60 Hz
Dimensions: 241 H x 191 W x 102 mm D (9.5 x 7.5 x 4")
Shipping Weight: 4.5 kg (10 lb)
Tube Dimensions: 3⁄8" OD, ¼" ID
Max Fluid Temperature: 54°C (130°F)
Enclosure: NEMA 3R (IP24) (acceptable for outdoor use)
Max Viscosity: 1000 centipoise
Max Suction Lift: Up to 3 m (10') of water


Model No. Maximum GPD mL/min Strokes/min Maximum psi
FPUDX1701A 34.2 90 30 125
FPUDX1702A 89.7 236 45 125
FPUDX1703A 133.8 352 125 125
FPUDX1704A 304.2 800 125 20


No customer comments for the moment.

Only registered users can post a new comment.

27 other products in the same category:

Categories

Suppliers

    Copyright 2018 Semeru Teknik. All Rights Reserved