Omega PHP-200 Series

Chemical Metering Pumps Microprocessor-Based, High Performance

More details

The PHP-200B Series is a diaphragm-type, solenoid driven microprocessor based metering pump with maximum capacities to 4.5 gph and maximum back pressures to 253 psig. The housing is constructed of fiberglass-reinforced PPE plastic, with a NEMA 4X (IP65) enclosure rating to protect against corrosion, dust and water. A removable hood covers the faceplate. The drive unit houses a short-stroke solenoid with a maximum stroke length of 1.25 mm (0.05"). It is equipped with a noise suppressing mechanism for quiet operation and has only one moving part, the armature. The diaphragm is constructed of fabric-reinforced EPDM elastomer with a plastic core and PTFE facing. It is chemically resistant against virtually all process fluids and can be used over a wide temperature range. Suction and discharge ports are equipped with double ball check valves for maximum repeatability. Feed rate is determined by stroke length and stroke rate. Stroke length is manually adjustable from 1 to 100% in increments of 1% via the stroke length knob. Two control modes are available for the PHP-200B Series: manual or analog control.

The PHP-210B Series incorporates all the features of the PHP-200B and also accepts a current input signal. This allows the stroking rate to be controlled by standard process signals.


FEATURES

• Continuous Stroke Length Adjustment Measured

Direct Calibration and Built-In Warning

Adjustable Back-Pressure Control

Totalized Output in U.S. Gallons or Liters

Bleed Valve Standard

Control Options: Manual or Analog

Relay Output Option

Available In Polypropylene, PTFE or Stainless Steel Liquid Ends


SPECIFICATIONS
    Maximum Stroke Length: 1.25 mm (0.05")
    Materials of Construction:
    Housing: Fiberglass-reinforced PPE
    Diaphragm: PTFE-faced EPDM with plastic core
Liquid-End Options: Polypropylene (P), PTFE (T), 316 SS (S)
Seal: FKM for P models, PTFE for T and S models
Enclosure Rating: NEMA 4X (IP66)
Power Supply: 100 to 230 Vac, 1 phase, 50/60 Hz ±10%
Repeatability of Metering: ±2% under constant conditions and at minimum 30% stroke length
Ambient Temperature Range: -10 to 45°C (14 to 113°F) Max Fluid Operating Temperature: 50°C (122°F)
Power Cord: 2 m (6')


Capacities and Specifications

 

 

 

Model No.

Capacity at

Maximum Backpressure

Capacity at ¹⁄₂ Max

Backpressure

Suction/

Discharge Line

OD x ID

(-P, -T)

 

Pre-Primed

Suction Lift (ft)

 

 

Shipping

Wt (lb)

 

psi

US GPH

(LPH)

cm3/

Stroke

USG PH

(LPH)

cm3/

Stroke

PHP-201B/

PHP-211B

145

0.19

(0.719)

0.09

0.21

(0.82)

0.076 1⁄4 x 3⁄16" 16.4 8.6 (3.9)

PHP-202B/

PHP-212B

253

0.29

(1.10)

0.13

0.37

(1.40)

0.13 1⁄4 x 3⁄16" 16.4 8.6 (3.9)

PHP-203B/

PHP-213B

253

0.55

(2.08)

0.24

0.66

(2.50)

0.24 1⁄4 x 3⁄16" 16.4 8.8 (4.0)

PHP-204B/

PHP-214B

145

1.10

(4.16)

0.45

1.32

(5.00)

0.46 1⁄2 x 3⁄8" 16.4 9.0 (4.1)

PHP-205B/

PHP-215B

253

1.10

(4.16)

0.38

1.29

(4.90)

0.45 1⁄2 x 3⁄8" 13.1 10.8 (4.9)

PHP-206B/

PHP-216B

101

2.90

(10.58)

1.02

3.46

(13.10)

1.21 1⁄2 x 3⁄8" 9.8 12.8 (5.8)

PHP-207B/

PHP-217B

58

4.50

(17.0)

1.58

5.04

(19.10)

1.77 1⁄2 x 3⁄8" 9.8 12.8 (5.8)


No customer comments for the moment.

Only registered users can post a new comment.

27 other products in the same category:

Categories

Suppliers

    Copyright 2018 Semeru Teknik. All Rights Reserved