MBY series gear reducer for side drive mill

Center distance a =400~1100 mm
Ratio i =4.0~7.1
Power range: 120kW~7900kW

Operational environment and condition
Ambient temperature:-20°C~+40°C
Ambient humidity:below 85%
Environment: ventilative area where is free from corrosive gas, explosive gas and vapor. Lubrication oil needs to be warmed up when the temperature is below 0°C.

 

Description of product codes:

 

Product code :

 

MBY(X)800-6.3-ⅠR MBY(X)——MBY type or MBYX type 800——indicates the center distance of 800mm 6.3——Nominal reduction ratio of 6.3(Please state the actual ratio in the purchasing order)Ⅰ——indicates the installation mode Ⅰ(Optional from:Ⅰ、Ⅱ、Ⅲ、Ⅳ、Ⅴ、Ⅵ)
R——sense of rotation(sense of rotation of output shaft facing the output shaft):R-cw;L-ccw

 

The following types are available for selection

 

 

6 reduction ratios are optional:4,4.5,5,5.6,6.3,7.1。
Please contact our sales department for type selection. If a bigger gear reducer is needed, please consult our design department.

 


Please contact our sales department for type selection. If a bigger gear reducer is needed, please consult our design department.

 


Input speed:normally≤1800r/min  Ambient temperature: -40~50℃;   
Gear precision:not lower than grade 5 stipulated in IS0 1328-1:1995 for cylindrical gears and grade 6, GB/T 11365 for bevel gears.


No customer comments for the moment.

Only registered users can post a new comment.

Categories

Suppliers

    Copyright 2018 Semeru Teknik. All Rights Reserved